MX-0404-QI 1.png
MX-0404-QI 2.png
MX-0404-QI 3.png
MX-0404-QI 4.png
MX-0404-QI 5.png

4x4 HDMI over UTP Matrix Switcher with 4x Receivers, IR, RS-232 and IP control (1080P: 40m/131ft)


The WyreStorm 4x4 Quick-Install pack is a system of HD switching and extension that comprises of a 4 Input/4 Output HD Matrix together with 4 display receivers that together provide a total solution for single-cable HD Distribution and Control over distances of up to 40m/131ft in residential or commercial settings.



40m/131ft Transmission

Distribution of satellite & cable sources, BluRay & media players and even games consoles to 40m/131ft using Cat5e cable. Full HD 1080p video and HD audio formats are supported.

Complete Solution

QI stands for Quick Install and that's exactly the idea. The MX-0404-QI comes with everything needed to set up a 4x4 matrix system - just add Cat5e and HDMI cables!


The MX-0404-QI is fully controllable via Serial RS-232 or IP with integration of the WyreStorm Enado or 3rd party control systems. WyreStorm templates and major control system drivers available for ease of installation, truly making the MX-0404-QI quick to install!

In Control with IR pass-through

If Full HD video & audio weren't enough, we've also included the ability to control the connected source devices from the zones so you're always in control of content.


  • Quick and easy installation – set up in seconds straight out of the box.
  • Simplified ports - Input: HDMI – Output: integrated RJ45 connectors for a single Cat5e/6 UTP cable to each display point for ease of installation
  • Conforms to IEEE-568B standards
  • Each HDMI port also supports DVI signals
  • Each Output port can be fed to multiple displays (cascaded)
  • Enables up to 4 HDMI video/audio devices to be independently switched through up to 4 HDMI displays or projectors for uncompressed digital distribution
  • Each output able to show any connected source simultaneously regardless of whether the input carries HDCP encryption
  • Reads and copies EDID from connected devices with additional EDID configuration through customizable DIP switch settings if necessary
  • 2k resolution
  • Fully 3D compatible – Frame packing/sequential 3D (Blu-ray) and interlaced stereoscopic 3D (satellite broadcasts)
  • Supports all high definition resolutions up to and including 1080p and standard video formats
  • RS-232 port
  • Choose from 6 switching modes – infrared remote control, front panel buttons, local IR, IR call-back, LAN and RS-232
  • Simple switching remote control included, which can also be learned into a universal remote handset to allow the control of multiple devices from one handset
  • Fully compatible for integration with market leading control systems
  • 4 x IR 3.5mm mini-jack ports to allow IR control of the source devices from the display locations (1-way IR)
  • Additional infrared extension port for longer IR connections
  • Supports 24bit color depth
  • Signalling rate of 6.75 Gbps
  • Pack comes complete with 1 x 4x4 Matrix with 19” rack brackets, 4 x 40m IR receivers with mounting brackets, IR receivers, emitters and a Matrix remote control handset

Additional features included on the RX-1UTP-IR-40 Display Receiver

  • Transmits one-way signal together with the HDMI signal over a single Cat5e/6/7 cable.
  • Receivers capable of 1080p transmissions up to 40m/131ft under ideal conditions*
  • For even greater control and fine tuning, each receiver features distance setting adjustment for optimizing the transmission signal
  • Protection against ESD (electrostatic discharge) included within the unit to further stabilize transmission.
  • LED indications for clear power and video signal selection
  • 5v mains supply included
  • Fully cascadable to further lengthen transmission

For longer transmission distances, RS-232 control and Ethernet pass-through, please see our HDBaseT™ range of matrices, transmitters, receivers and extender sets.


Audio and Video

Matrix Recevier
Inputs 4x Input: 19-pin type A 1x Cat5e: 8-pin RJ-45 Female
Outputs 4x Output UTP: 8-pin RJ-45 female
1x HDMI Out: 19-pin type A
Encoding Data Rate 6.75Gbps
Audio Formats 2ch PCM | Multichannel up to Dolby TrueHD and DTS - HD
Video Resolutions (Max) Video Resolutions
1920x1200p @30Hz 8bit
1920x1080p @30Hz 8bit
Color Depth 8bit
Maximum Pixel Clock 340MHz

Communication and Control

HDMI HDMI 1.3 | HDCP 1.3
Ethernet 1x LAN: 8-pin RJ-45 Female | 10/100Base-T
RS-232 1x RS-232: 9-pin DB9 Female | Matrix Control and Firmware Updates
IR 1x IR Ext: 3.5mm (1/8in) TRS Stereo | 4x IR TX: 3.5mm (1/8in) TS Mono
1x IR RX: 3.5mm (1/8in) TRS Stereo


Power Supply
100~240V AC 50/60Hz 5V DC 2A
Max Power Consumption 22W


Operating Temperature 32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature -4°F to ~ 158°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Maximum BTU 76 BTU/hr
6 BTU/hr

Dimensions & Weight

Matrix Recevier
Rack Units/Wall Box 1.17U < 1U
Height 52mm/2.05in 23mm/0.91in
Width 440mm/17.33in 60mm/2.37in
Depth 235mm/9.26in
Weight 2kg/4.41lbs


Safety and Emission CE | FCC | ROHS

Case Studies