NHD-210-RX 1.png
NHD-210-RX 2.png
NHD-210-RX 3.png

NetworkHD™ 200 Series AV over IP H.264 Decoder with Video Wall Processing

NHD-210-RX

The NHD-210-RX is the video wall display decoder for the NetworkHD™ 200 Series, an ultra low bandwidth H.264 AV over IP solution with all the functionality of the NetworkHD 100 series but with powerful video wall processing functionality up to 10x10 screens.

The NHD-210-RX H.264 decoder is intended for use with either the NHD-100-TX or the NHD-200-TX H.264 encoder (sold separately) to provide end-to-end streaming to video wall displays. It is also compatible with the NHD-000-CTL system controller.


eth_2k100.png

Overview

Highly Scalable

Powered by H.264 encoding for a high quality, low bandwidth AVoIP solution, the cross-compatible NetworkHD 100 and 200 Series modular system architecture removes the limitations of traditional fixed platform matrix systems, whilst offering significant cost savings for large scale deployments.

Video Walls

The NHD-210-RX decoder offers matrix switching and video wall functionality up to 10x10 when paired with an NHD-200-TX encoder for multi-format input transmissions of DVI, HDMI, Component and VGA including HDMI and analog audio breakout.

NetworkHD Touch

A revolution in AV control, WyreStorm’s award-winning NetworkHD Touch™ App for iPad puts the entire NetworkHD system at your fingertips. See what you’re switching with live video source and display previews and instant drag and drop content selection, with Enado integration adding source control and more control possibilities.

QuickSync™ Seamless Switching

WyreStorm’s QuickSync technology offers virtually instantaneous, seamless source switching free of glitches or tears between video streams for an enhanced user experience worthy of any professional video distribution installation.

Features

  • Highly scalable, high quality low-bandwidth solution using the most efficient compression technologies to allow for very large commercial AV deployments
  • NetworkHD Touch iPad control app for live video previews and drag and drop source selection
  • Offers video wall functionality up to 10x10 screens
  • Matrix switching functionality
  • Compatible with NHD-000-CTL controller and either the NHD-100-TX or the NHD-200-TX encoder
  • Plug and Play setup with quick networking configuration and auto discovery of components
  • QuickSync™ technology for virtually instantaneous seamless switching
  • Full RS-232 control of connected displays and CEC One-Touch Play / Standby commands via HDMI
  • Major control systems drivers available including the WyreStorm Enado™ Control System
  • Use with the NetworkHD controller (NHD-000-CTL) for matrix control and management via the LAN, as well as for allowing control from third party control system such as AMX, Crestron, Control4, RTI & Enado
  • Supports PoE to be remotely powered by compatible power source equipment, eliminating the need for a nearby power outlet
  • Standards-based H.264/MPEG-4 AVC video compression
  • Full PC control suite available free of charge at wyrestorm.com
  • Supports HDCP

Specifications

Audio and Video

Inputs 1x LAN (PoE) 8-pin RJ-45 female | 10/100/1000Base-T
Outputs 1x HDMI In 19-pin HDMI type A female
1x Audio Out: 3-pin Phoenix
Audio Formats 2ch PCM
Output Video Type H.264/MPEG-4 AVC
Video Resolutions (Max) Note: Interlaced content at any resolution is not supported, all source content must be progressive. HDMI: 1920x1080p @60Hz 8bit (15m/50ft) Cat6/6a/7: 1920x1080p @60Hz 8bit (100m/328ft Point to Point)
Encoding Data Rate 2~30Mb/s
End to End Latency 60~90 ms (Low latency mode) | 250~300 ms (High quality mode)
Color Depth 8bit
Maximum Pixel Clock 150MHz

Communication and Control

HDMI HDMI | HDCP 1.4
Ethernet
1x 8-pin RJ-45 female | 10/100Base-T | PoE
RS-232 1x RS-232: 3-pin Phoenix

Power

Power Supply 12V DC 1A
PoE IEEE 802.3af | 12V 1A 12.95W
Max Power Consumption 6W (DC adapter)

Environmental

Operating Temperature 32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
StorageTemperature -4°F to ~ 158°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Maximum BTU 20.47 BTU/hr

Dimensions & Weight

Rack Units/Wall Box <1U
Height 25mm/0.98in
Width 228mm/8.98in
Depth 111mm/4.37in
Weight 0.6kg/1.32lbs

Regulatory

Safety and Emission CE | FCC | RoHS

Case Studies