MX-0404-H2 1.png
MX-0404-H2 2.png

4x4 4K HDR HDMI Matrix Switcher with HDCP 2.2, SmartEDID and WebUI


Compact and fully-featured, the MX-0404-H2 matrix switcher might be the entry level model of the H2 matrix family, but don't that fool you.

With HDCP 2.2 support and 18Gbps throughput to the full video capability of HDMI 2.0, the MX-0404-H2 more than manages the distribution of 4:4:4/60 and HDR content, supporting the latest broadcast standards and next generation 4K HDR source content.


Plug & Play Installation

Using native HDMI signals & connections, the MX-H2 range couldn’t be easier to setup: make the connections, power on and relax. With EDID and HDCP automatically managed, it really is as easy as 1-2-3.


The latest 4K UHD content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the H2 product family, the MX-0404-H2 supports the multi-point distribution of this content over native HDMI cables.


Plug & Play aside, the MX-H2’s have an internal Web interface which can be accessed via a laptop, tablet or smart phone for set up, configuration or simply to switch sources via the intuitive on-screen interface.


WyreStorm's dynamic EDID management software removes conflict when mixing 1080p and 4K displays on the same matrix device, always selecting the best possible content from a source, depending on the screens that want to access it.


  • Independent switching and control of up to four 4K HDR HDMI sources to up to four individual 4K HDR HDMI display devices
  • 4K@60Hz 8bit 4:2:0 | 4K@30Hz 8bit 4:4:4 | 4K HDR @24Hz 10bit with chroma sub-sampling rate of 4:2:0
  • 1080p@60Hz 48bit color with, including 3D
  • Latest HDCP 2.2 encryption technology supported ensuring compatibility with the latest 4K HDR content and sources
  • Multichannel audio up to 7.1 including DTS:X and Dolby Atmos
  • HDMI Inputs and Outputs support bandwidths of 18Gb/s
  • SmartEDID feature also dynamically detects display/source capabilities and automatically outputs the highest possible resolution
  • Manual EDID management via DIP to read and copy EDID from connected devices to aid communication and device compatibility
  • QuickSync™ technology for instant seamless I/O switching
  • Embedded WyreStorm WebUI enables simple source switching and installer set-up and configuration
  • Flexible control options – local push button or via IR, RS-232 or LAN
  • RS-232 serial control allows central control of all connected display devices via WyreStorm control software included, Enado or other leading third party control systems
  • 3.5mm jack input for receiving local IR commands out of line-of-sight
  • Remote control able to be learned into a universal remote handset to allow the control of multiple devices from one handset
  • Automatically adjusts feedback, equalization and amplification of signal for easy installation
  • Conforms to IEEE-568B standards
  • Stylish chassis design with laser-engraved aluminium front fascia and bright yellow LED display to illustrate source selection on each output
  • 1U chassis size
  • Universal power supplies included
  • Mounting brackets included


Audio and Video

Inputs 4x HDMI 19-pin type A female
Outputs 4x HDMI 19-pin type A female
Audio Formats 2ch PCM | Up to DTS-X and Dolby Atmos
Max. Video Resolution 1920x1080 @@60Hz 12bit (15m/50ft) | 16bit (10m/33ft)
3840x2160p @30Hz 4:4:4 8bit (7m/23ft) | @24Hz 4:2:0 HDR 10bit per channel (3m/9.8ft)
4096x2160p @60Hz 8bit 4:2:0 (7m/23ft) | @60Hz 8bit 4:4:4 (7m/23ft)
Color Depth 1080p: 16bit deep color| 4K UHD: 8bit | HDR @24p: 10bit per channel BT.2020
Maximum Pixel Clock 600MHz

Communication and Control

HDMI HDMI 2.0 | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
RS-232 1x 9-pin DB9 Female | Control of Matrix functions | Telnet commands supported.
Ethernet 1x 8-pin RJ-45 female | 10/100 Mbps auto-negotiating | Built-in Web UI | IP Control
IR 1x Front Panel IR Sensor | Handheld IR Remote Included
1x IR Ext 3.5mm (1/8in) Stereo
Front Panel Navigation buttons for source and display selection.


Power Supply 100~240V AC 50/60Hz
Max Power Consumption 21W


Operating Temperature 32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
StorageTemperature -4°F to ~ 158°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Maximum BTU 71.65 BTU/hr

Dimensions & Weight

Rack Units/Wall Box 1U
Height 43.5mm/1.72in
Width 440mm/17.33in
Depth 300mm/11.82in
Weight 3.94kg/8.67lbs


Safety and Emission CE

Case Studies