SW-1001-HDBT 1.png
SW-1001-HDBT 2.png
SW-1001-HDBT 3.png

10x1 HDBaseT™ Presentation Switcher with 2x Mic Controls and CEC

SW-1001-HDBT

The SW-1001-HDBT multi-format HDBaseT™ presentation switcher enables the connection and switching of up to 6 HDMI, 1 Display Port, 1 HDBaseT™ and 2 VGA sources with embedded audio onto the output signal for the VGA sources with an internal scaler ensuring instant source switching by matching the resolution of the display device up to 1920x1200p.

Featuring adjustable microphone inputs with selectable phantom power able to be mixed with the source audio and sent via the line-level output, the SW-1001-HDBT includes both HDMI output for local connection or HDBaseT™ output for transmission over distances up to 100m/328ft, along with PoH, Ethernet and control all sent to a WyreStorm RX-70-4K receiver (sold separately).


cat6_2k100.png

Overview

HDBASET AND CEC SUPPORT

The SW-1001-HDBT offers multi-format input to HDBaseT output, with PoH to power a connected HDBaseT display receiver and serial control up to 100m/328ft, with duplicate HDMI output for fast, seamless switching and automatic CEC trigger on outputs to send power commands to display CEC capable devices.

MULTIPLE CONTROL METHODS

Looking for the best way to control the SW-1001-HDBT? Look no further; the SW-1001-HDBT can be controlled via front panel display buttons, with the built, intuitive Web UI, contact closure panels, or with a control system via RS-232 or IP.

AUTO SCALING CAPABILITES

With all the different types of source and display devices that can be used with the SW-1001-HDBT, scaling is an important feature. The SW-1001-HDBT has the ability to automatically scale to output the most resolution all the way from 640x480 to 1920x1200 @60Hz, based on the EDID of the display.

FOR LARGER CORPORATE PRESENTATIONS…

Big brother to the SW-0501-HDBT, the SW-1001-HDBT is equipped for larger corporate presentation installations to handle more input source devices. Supporting up to 6 HDMI, 1 DisplayPort, 2 VGA with audio source input, not to mention 1 HDBaseT input, where a remote signal can be fed from a WyreStorm in-wall or standalone transmitter. All of these source options are sent to duplicate HDMI and HDBaseT outputs to either a local or remote zone. No presentation installation is too large for the SW-1001-HDBT!

Features

  • Allows up to ten multiformat inputs to be switched to two mirrored outputs
  • 6 HDMI, 1 DisplayPort, 1 HDBaseT™ IN and 2 VGA audio source inputs to duplicate HDBaseT™ and HDMI outputs
  • Fast, seamless switching between HDMI and VGA inputs
  • Local mirrored HDMI output and HDBaseT™ output with transmission distance up to 100m/328ft to compatible display receiver
  • PoH on HDBaseT™ IN and OUT remotely powers HDBaseT™ Transmitter and Receiver to eliminate local power access at either location
  • Features fast, seamless switching between HDMI and VGA inputs with QuickSync technology
  • Supports input resolution up to 1920x1200@60Hz
  • Unit remembers the connected sequences of each input - follows the Last-In-First-Out rule, always outputting the most recently connected active source
  • Auto-scaler outputs the most suitable resolution for connected devices from 640x480@60Hz to 1920x1200@60Hz based on the display device EDID as well as different fixed resolutions for selections
  • Follows Last-In-First-Out rule: always outputting the most recently connected active source
  • Dual microphone inputs with phantom power supporting dynamic or condenser mics
  • 2x stereo audio input (VGA source only) and 1x auto mix stereo audio output
  • Features audio embedding and de-embedding - VGA source embedded with corresponding stereo audio for A/V input with audio extracted from A/V output when switching
  • Multiple control methods: front panel buttons for source selection, LAN (Telnet & Web GUI) for device control and management and RS232 for device control, debugging and power control
  • CEC compatibility to enable CEC-enabled devices such as TVs enter standby mode and return to their normal working state without user intervention - functionality also possible via rear panel RS-232
  • Supports multiple communications protocols such as IP, TCP, Telnet, UDP

Specifications

Audio and Video

Inputs 6x HDMI 19-pin type A
1x HDBaseT™ In 8-pin RJ-45 female
2x VGA 15-pin DSUB15 VGA
2x Audio In (VGA Audio) 5-pin Phoenix Connector
1x Display Port
2x Mic In 3-pin Phoenix Connector
Outputs 1x HDMI 19-pin type A | 1x HDBaseT 8-pin RJ-45 female
1x HDBaseT™ Out 8-pin RJ-45 female
1x Audio Out 3-pin Phoenix Connector
Audio Formats 2ch PCM
Max. Video Resolution HDMI
1920x1080p @60Hz 12bit (15m/50ft) | 16bit (7m/23ft)
Using Cat6
1920x1200 @60Hz 12bit (100m/328ft) | @60Hz 16bit (70m/230ft)
Using Cat6a/7
1920x1200 @60Hz 12bit (100m/328ft)
Color Depth 1080p: 16bit
Maximum Pixel Clock HDMI: 194MHz | HDBaseT™: 194MHz

Communication and Control

HDMI HDCP 1.4 compliant | DVI/D supported with adapter (not included)
HDBaseT™ HDCP 1.4 compliant | EDID | 1-way PoH | Bidirectional IR and Ethernet
Ethernet 1x LAN 1 8-pin RJ-45 female | Bidirectional over HDBaseT™
1x LAN 2 8-pin RJ-45 female | Web UI | IP Control
IR 1x IR TX/RX (HDBT In) 5-pin Phoenix | Bidirectional over HDBaseT™
1x IR TX/RX (HDBT Out) 5-pin Phoenix | Bidirectional over HDBaseT™
RS-232 1x RS-232 (HDBT In) 3-pin Phoenix | Bidirectional over HDBaseT™
1x RS-232 (HDBT Out) 3-pin Phoenix | Bidirectional over HDBaseT™
1x RS-232 4-pin Phoenix | Matrix Control | Firmware Updates
1x RS-232 4-pin Phoenix | Loop Out for device stacking

Power

Power Supply 100~240V AC 50/50Hz
PoH 48V 15.4W
Max Power Consumption 26.5W
Microphone Phantom Power 48V DC 100mA

Environmental

Operating Temperature 32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
StorageTemperature -4°F to ~ 158°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Maximum BTU 90.4 BTU/hr

Dimensions & Weight

Rack Units/Wall Box 1U
Height 43.5mm/1.72in
Width 440mm/17.33in
Depth 273mm/10.75in
Weight 4.85kg/10.67lbs

Regulatory

Safety and Emission CE | FCC | RoHS

Case Studies