WyreStorm IR Link Cable for Control System Integration

Part Number CAB-IR-LINK

Compatible with leading control systems

The WyreStorm CAB-IR-LINK IR integration cable provides integrators with a simple 2-way IR integration between WyreStorm products and any mainstream control system. 

Simply plug the CAB-IR-LINK cable from the IR emitter output of any control system to the IR RX port of a WyreStorm matrix or extender set to achieve seamless control system compatibility and integration.

Key Features:

  • The missing link needed for seamless integration of a control system and display devices
  • Easily connects to any mainstream control system to easily integrate TVs and projectors and achieve proper display control
  • Auto-sensing feature for polarity and voltage recognizes different control systems for easy integration


  • Compatible with most leading control systems, including: Control4, Crestron, AMX, Niles, RTI, Bitwise and WyreStorm Enado
  • 1.2m (length) mono-stereo IR integration cable*
  • Auto-sensing polarity
  • Automatically adjusts for 5v or 12v control bus
  • Tip-VCC 5V, Ring-Signal, Sleeve-Ground
  • 3.5mm gold plated stereo plug

*Not suitable for use with jack extension leads

In the Box

1 x WyreStorm CAB-IR-LINK cable


0.48kg/ 1.05lbs

Cable Length: 1050mm/41.3”

Cable Width: 4mm/ 0.15”

Connector Body: 9mm/ 0.35”

Active Circuit Housing: 13mm/ 0.51”

Plug Width: 3.5mm/ 0.13”

Cord Material: PVC

Connector Material: Gold plated nickel