Installer Testing Kit

Wyrestorm TTMONITOR
A 7” HD LCD test monitor supporting 1080p resolutions designed to provide digital video and audio feedback on signal outputs in real time. With the ability to replicate EDID information from any display, the TTMONITOR will recognize any HDMI or DVI sources up to 1080p or 1920x1200 and provide readout of display output.
Audio can be monitored by the small internal speaker or external speakers/headphones via the stereo 3.5mm mini-jack port on the rear of the unit.
Highly versatile with 20 preinstalled mode settings covering all screen resolutions from 480i to 1920x1200, including Horizontal Frequencies (kHz), and Vertical Frequencies (Hz) variations.
8 x pre-installed EDID settings to test communication between variations combinations of HDMI versions, Audio settings and screen resolutions.
The TTMONITOR is light and compact for portability but with a high quality, durable metal casing that ensures its contents are kept well protected during life on site.
 

Wyrestorm TTSIGNAL
A multi-input/format HD Pattern Signal generator capable of sending high resolution 2D test patterns and providing on-screen EDID readouts via the Display Data Channel (DDC). Outputs include 1080p, 1920×1200, 1600×1200, 1080i as well as other standard video formats.
It supports RGB, YUV444 and YUV422 colour formats and outputs signals in both HDMI or DVI, with an audio bit depth resolution of 16bit, 20bit and 24bit.
The TTIGNAL can encrypt signals as well as featuring deep color bit depths including 24bit, 30bit and 36bit and has two audio sampling rates (44.1KHz and 48KHz).
Ideal for pinpointing any issues of interoperability via sources, switches, matrices etc, the TTSIGNAL is the perfect choice as a test facility for various applications and locations, whether an industrial, residential, commercial or research setting to test and evaluate products.
 

Wyrestorm HDMI Extender

The Wyrestorm HDMI extender enables longer HDMI transmissions of full, uncompressed 1080p HD video and audio over distances of up to 20m/66ft.
Typical HDMI transmissions can become unstable over distances greater than 10m but acting as a signal booster and repeater, the Wyrestorm extender allows for a longer HDMI cable to be used from the source - ideal for reliable point-to-point HDMI extension in test conditions or on site system diagnostics using the pattern generator and test display.
With the same attention to build quality and device compatibility as all extenders in the Wyrestorm range, our HDMI extender is fully cascadable, includes RS232 for diagnostic use and EDID management to assist in the communication between connected devices.
Power to the extenders can be supplied either via the 5v mains adaptor or the USB to 5v adapter cable connected to devices with spare USB ports or directly into the portable battery pack also included in this test kit. This is not only more energy efficient as the extenders are only powered when you need them, it also solves power availability problems, especially at the display end.
 
Innovator III Portable Power bank/pack
The Innovator III is an 8400mAh portable power bank and univeral USB external battery pack, including dual USB output for powering Wyrestorm test equipment and additional charging capabilities for mobile devices such as iPhones, iPods, IPads, smartphones, tablets and portable games systems or controllers.  [Dual USB output: 5v/2.0A; 5v/0.6A]
 
Compact and portable yet with a solid design and construction required for life on-site.
LED lights indicate level of power remaining in device, with 2 x USB port options 0.6A and 2.0A for faster charging capabilities and 1 x mini USB port used to power external charger through an AC outlet. For flexibility and convenience, the Innovator III also includes a selection of cables and connections to power and charge a variety of portable devices.
 
Note: rechargable Lithium-ion batteries gain power capacity through charge cycles - we recommend an initial overnight charge before use to maximize battery power capabilities.