WyreStorm HDMI Extender Set with IR (40m/131ft)

Categories:
Part Number EX-1UTP-IR-40

* * * DISCONTINUED * * * 

The WyreStorm EX-1UTP-IR-40 is a short range single cable extender set capable of transmiting full 1080p HD video, HD audio and one-way IR source control together through the HDMI signal over a Cat5ei/6/7 cable distances up to 40m (131ft) under ideal transmission conditions*

For even greater control and fine tuning, the EX-1UTP-IR-40 features EQ DIP swicthes on both Transmitter and Receiver baluns to either encourage EDID communication between devices in the event of installation difficulties (Transmitter) or a fully adjustable EQ distance range for optimising the transmission signal depending on cable length (Receiver)

The EX-1UTP-IR-40 also contains protection against ESD (electrostatic discharge) within the baluns to further stabilise transmission with LEDs on the unit housing for clear power and video signal indication.  5v mains supply included but receivers may be powered through the USB port of the display using WyreStorm USB to 5v power adapter (see accessories)

Available alternative:  40m/131ft Low Profile 1UTP 2W IR

Overview

See video

Designed with the typical requirements of todays installation projects in mind, the EX-1UTP-IR-40 is a highly adaptable single-cable point to point HD extender set capable of 1080p transmissions up to 40m (131ft) under ideal conditions* with wide-band IR control of source devices from remote locations.

For even greater control and compatibility, the Transmitter features a fully adjustable EQ EDID DIP settings to encourage communication between the connected devices, while an EQ Distance Range selector on the Receiver allows the transmission signal to be optimised specifically by distance.  Both EQ switches offer fully customisable settings to fine-tune your distribution through the baluns,

Transmitter and Receiver baluns also contain protection against ESD (electrostatic discharge) to further stabilise transmission with LEDs on the unit housing for clear power and video signal indication.  5v mains supply but baluns may also be powered through the USB port of connected devices using Wyrestorm USB to 5v power adapter (both power adapters included)

Additionally, the EX-1UTP-IR-40 is fully cascadable, with transmission lengthened by connecting to multiple 40m extender sets for increased distribution and even greater flexibility, whatever the installation environment.

*NOTE: ideal conditions denote cable run is within specified distance range of product, no electrical interference, the use of straight cable runs with no bends or kinks and no patch panels orwall outlets used. Please be advised that the presence of any of these factors in your installation may compromise bandwidth and signal strength.  For even longer transmission distances, RS232 control and Ethernet pass-through, please see our full Class A or Class B HDBaseT range of matrices, transmitters, receivers and extender sets.

Features

  • Transmits a wide-band one-way IR control signal together with the HDMI signal over a single Cat5ei/6/7 cable.
  • Receivers capable of 1080p transmissions up to 40m (131ft) under recommended conditions.*
  • Automatically adjusts feedback, equalization and amplification of signal for easy installation.
  • For even greater control and fine tuning, each receiver features a fully adjustable EQ distance range for optimising the transmission signal.
  • Follows IEEE-568B cable termination standards
  • Protection against ESD (electrostatic discharge) included within the unit to further stabilise transmission.
  • LED indications for visual power and video signal status.
  • Power baluns by 5v mains adapter or with the 5v USB power cable (both included) to solve space or power availablility problems as well as being more energy efficient as the extenders are only powered when connected devices are turned on.
  • Fully cascadable to further lengthen transmission.
  • EDID DIP switch on Transmitter to encourage EDID communication between sources and displays in the event of signal transmission difficulties.
  • DISTANCE ADJUSTMENT on Receiver balun can be further fine-tuned depending on the length of Cat5e/6/7 cable used for optimum performance.

*Recommended transmission conditions denote cable run is within specified distance range of product, no electrical interference, the use of straight cable runs with no bends or kinks and no patch panels or wall outlets used.  Please be advised that the presence of any of these factors in your installation may compromise bandwidth and signal strength.  For longer transmission distances, LAN control and Ethernet pass-through, please see our full HDBaseT or HDBT Lite range of matrices, transmitters, receivers and extender sets.  

In the Box

  • 1 x EX-1UTP-IR-40 transmitter 
  • 1 x EX-1UTP-IR-40 receiver
  • 1 x Printed quickstart installation guide (also downloadable from this product page)
  • 2 x pairs mounting brackets
  • 2 x 5VDC power supply 
  • 1 x IRTX - IR transmitter for source connection
  • 1 x IRRX - IR Receiver for display connection  -  IR frequency range:   940nm IR Frequency: 38KHZ    

Specifications

60mm/2.4” x 115mm/4.5” x 23mm/0.9”
0.15Kg / 0.3lbs (each)
-5 to +35°C (-41 to +95 °F)
5 to 90 % RH (no condensation)
6.75Gbps
0.5-1.0 volts p-p
5 volts p-p (TTL)
1080p 24bit colour depth
1080p up to 40m / 131ft (Under perfect transmission conditions including straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets.)

VESA: 640x480, 800x600,1024x768,1280x1024,1600x1200, 1920x1200 DTV/HDTV: 480i/576i/480p/ 576p/720p/1080i/1080p

HDMI v1.3 + HDCP (mirrors the input source to the output display)

DTS-HD Master Audio, Dolby True HD, multi-channel 5.1, 7.1, stereo
5VDC - from mains or USB 5V power adapter
1.5Watts Max. (each)
N/A
N/A