HDMI over HDBaseT 2-Gang Decora In-Wall 4K UHD Transmitter Kit (4K: 70m/230ft | 1080p: 100m/328ft)

Categories:
Part Number TX-IW-70-POH-KIT

- NOW SHIPPING -

The TX-IW-70-POH-KIT is a 2-Gang in-wall HDMI to HDBaseT 4K transmitter and standalone HDBaseT receiver kit that enables the reliable distribution of video up to 4K resolutions with HDR, multichannel audio, bidirectional control via IR and RS-232, PoH power and Ethernet passthrough over distance.

The TX-IW-70-POH-KIT can function either as a single source point-to-point extender solution or as part of a compatible HDBaseT matrix system containing an HDBaseT input for remote source connection, with the Decora wall plate offering inconspicuous local connectivity and control for a remote source to suit any interior.

An ideal solution for any WyreStorm H2X Series modular matrix switcher system containing an HDBaseT input card, the TX-IW-70-POH-KIT receiver supports 4K HDR video up to 70m/230ft and 1080p/48bit @60Hz to 100m/328ft, all wrapped up in an impossibly thin chassis for an ease of installation that represents unrivalled function, flexibility and reliability for AV applications of any kind.

Key features

  • Complete 2-Gang Decora in-wall Class A HDBaseT transmitter and standalone receiver kit
  • Extends 4K UHD video with HDR (HDMI only) up to 70m/230ft or 1080p to 100m/238ft
  • Class A HDBaseT 5Play device: 4K/HD video, multichannel audio, Ethernet, control (IR & RS-232) and Power over HDBaseT
  • In wall plate powered from included WyreStorm receiver or compatible matrix if used as part of a WyreStorm matrix switcher system
  • Receiver supports serial routing and CEC passthrough when used as part of compatible matrix system
  • HDCP 2.2 compliant

Overview

The TX-IW-70-POH-KIT 2-Gang in-wall transmitter features a front-facing HDMI input offering local source connectivity and 5Play connectivity from the HDBaseT output, Ethernet, power, RS-232 and IR connections located in-wall for lossless, single-cable transmission of 4K@30Hz signals over Cat6 up to 70m/230ft and 100m/328ft for 1080p.

When paired with its included PoH receiver (RX-70-4K) or a PoH enabled WyreStorm matrix switcher, the TX-IW-70-POH-KIT transmitter can also be powered remotely via PoH with no mains power or separate PSU required at transmission locations.  A built-in IR window ensures effortless control of the screen or projector with bi-directional IR and RS-232 signals from the receiver able to be broken out from the rear of the transmitter for enhanced control options.

The RX-70-4K receiver features the same powerful Class A HDBaseT technology and 5Play feature set support, including a 4K chroma sub-sampling colour palette of 4:2:2 for the optimal 4K pixel management-to-bandwidth balance to satisfy HDMI 1.4v standards. 

Serial control is supported when used as part of a WyreStorm H2 Series matrix switcher system, with the RX-70-4K featuring compatibility with leading control systems and switchable RS-232 selection for firmware updates. 

In terms of power, the RX-70-4K can remotely power the TX-IW-70-POH in-wall transmitter when used as part of a point-to-point extender system or can itself be powered by a PoH enabled WyreStorm matrix switcher if used as part of a HDBaseT matrix distribution.  The  RX-70-4K also offers improved 12v power connectivity via its phoenix port and threaded DC power port for standard and locking DC power plugs. 

Signal and device activity is illustrated by panel LED indicators for power supply, signal status for established display connection, Link for confirmed HDBaseT connection between matrix/receiver and HDCP presence in signal - all giving instant visual confirmation of operational status and helping to identify potential issues.

Full-featured and powerful, yet subtle in appearance, the TX-IW-70-POH-KIT offers a refined wall-plate transmission and standalone receiver HDBaseT solution that has never been so simple to integrate within modern 4K or HD distributions.

Features

Key features of TX-IW-70-POH-KIT
  • Complete 2-Gang Decora in-wall Class A HDBaseT transmitter and standalone receiver kit
  • Extends 4K UHD video with HDR (HDMI only) up to 70m/230ft or 1080p to 100m/238ft over single Cat6 using HDBaseT technology
  • Class A HDBaseT 5Play support: 4K/HD video, multichannel audio, Ethernet passthrough, bidirectional control (IR & RS-232) and Power over HDBaseT
  • TX and RX capable of being powered locally or remotely via PoH
  • HDCP 2.2 compliant

Additional features on Transmitter

  • Powered either locally or remotely from included receiver or PoH compatible matrix if used as part of a WyreStorm matrix switcher system
  • Built-in IR receiver window for easy TV/projector control, EDID management and automatic input detection
  • Bi-directional IR supported with built-in IR receiver window for easy TV/projector control
  • Supports Ethernet pass-through
  • Full 3D up to 1080p@60Hz
  • LED indication for HDCP presence within signal and transmission link between devices
  • Compact design for convenient and unobtrusive installation

Additional features on Receiver

  • Low profile chassis of 18mm / 0.7” for easier, more convenient installations behind screens at display zones
  • Powered either locally or remotely via a PoH enabled matrix if used as part of a WyreStorm matrix switcher system
  • Supports serial routing and CEC passthrough when used as part of compatible matrix system
  • Transmits discrete wide-band two-way IR control signal/routed serial commands from compatible matrix together within the HDMI signal
  • Multichannel audio up to Dolby Atmos and DTS:X
  • Switchable RS-232 selection for firmware update 
  • Additional phoenix port and threaded DC for use of both standard and locking DC power plugs
  • Visual LED indication for power supply, signal status to show display connection, HDCP in signal and Link between HDBaseT devices 
  • Automatically adjusts feedback, equalization and amplification of signal 
  • Energy efficient universal power supplies included 

In the Box

WyreStorm TX-IW-70-POH Transmitter

1 x WyreStorm TX-IW-70-POH HDBaseT Wall Plate Transmitter

1 x 3.5mm Phoenix male connector (3 pin) 

2 x 3.5mm Phoenix male connector (2 pin)

1 x Decorative Wall Plate with 4 screws

4 x 6-32x20mm Installation Screws

1 x Printed Quickstart guide (quickstart and full manual downloadable from product page)

 

WyreStorm RX-70-4K Receiver

1 x WyreStorm RX-70-4K Receiver 

1 x 3.5mm Phoenix male connector (2 pin) 

1 x 3.5mm Phoenix male connector (3 pin) 

1 x Wide-band IR Emitter 

1 x Wide-band IR Receiver (30-50KHz) 

1 x Pair of RX-70-4K mounting brackets 

1 x Printed Quickstart guide (quickstart and full manual downloadable from product page)

Specifications

AUDIO AND VIDEO
Product Number TX-IW-70-POH RX-70-4K
Inputs 1x HDMI 19-pin type A 1x HDBT In 8-pin RJ-45 female
Outputs HDBaseT 8-pin RJ-45 female 1x HDMI 19-pin type A
Audio Formats Up to 7.1 DTS Master HD and Dolby True HD 2ch PCM | Up to DTS-X and Dolby Atmos
Max. Video Resolution 

HDMI 
1920x1080p @60Hz 48bit (15m/50ft)
3840x2160p @24/25/30Hz 4:4:4 24bit (7m/23ft)
3840x2160p @24Hz 4:2:0 HDR 10bit (3m/9.8ft)
4096x2160p @60Hz 24bit 4:2:0 (7m/23ft)
 

Using Cat6
1920x1080p @24/25/30/60Hz 36bit (100m/328ft)
3840x2160p @24/25/30Hz 4:4:4 24bit (70m/230ft)
3840x2160p @24Hz 4:2:0 HDR 10bit per channel (35m/115ft)
4096x2160p @60Hz 4:2:0 24bit (70m/230ft)
 

Using Cat6a/7
1920x1080p @24/25/30/60Hz 48bit (100m/328ft)
3840x2160p @24/25/30Hz 4:4:4 24bit (100m/230ft)
3840x2160p @24Hz 4:2:0 HDR 10bit per channel (35m/115ft)
4096x2160p @60Hz 4:2:0 24bit (100m/230ft)

HDMI 
1920x1080p @60Hz 48bit (15m/50ft)
3840x2160p @24/25/30Hz 4:4:4 24bit (7m/23ft)
3840x2160p @24Hz 4:2:0 HDR 10bit (3m/9.8ft)
4096x2160p @60Hz 24bit 4:2:0 (7m/23ft)
 

Using Cat6
1920x1080p @24/25/30/60Hz 36bit (100m/328ft)
3840x2160p @24/25/30Hz 4:4:4 24bit (70m/230ft)
3840x2160p @24Hz 4:2:0 HDR 10bit per channel (35m/115ft)
4096x2160p @60Hz 4:2:0 24bit (70m/230ft)
 

Using Cat6a/7
1920x1080p @24/25/30/60Hz 48bit (100m/328ft)
3840x2160p @24/25/30Hz 4:4:4 24bit (100m/230ft)
3840x2160p @24Hz 4:2:0 HDR 10bit per channel (35m/115ft)
4096x2160p @60Hz 4:2:0 24bit (100m/230ft)

Color Depth (Max) 1080p: 48bit | 4K UHD: 24bit | HDR @24p: 10bit per channel BT.2020 1080p: 48bit | 4K UHD: 24bit | HDR @24p: 10bit per channel BT.2020
Video Input Impedance 100 Ω 100 Ω
Maximum Pixel Clock 297mHz 297mHz
 
COMMUNICATION AND CONTROL
HDMI HDCP 2.2 Compliant | EDID | DVI/D supported with adapter (not included) HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
HDBaseT HDCP 2.2 Compliant | EDID | PoH (1-way TX to RX) | Bidirectional IR, RS-232, and Ethernet HDCP 2.2 | EDID | PoH (2-way) | Bidirectional IR, RS-232, and Ethernet
Ethernet 1x 8-pin RJ-45 female | 10/100 Mbps auto-negotiating | Bidirectional over HDBaseT 1x 8-pin RJ-45 female | 10/100 Mbps auto-negotiating | Bidirectional over HDBaseT
IR 1x IR TX 3.5mm (1/8in) Mono | Bidirectional over HDBaseT
1x IR RX 3.5mm (1/8in) Stereo | Bidirectional over HDBaseT
1x IR TX 3.5mm (1/8in) Mono | Bidirectional over HDBaseT
1x IR RX 3.5mm (1/8in) Stereo | Bidirectional over HDBaseT
RS-232 1x 3-pin Phoenix Connector | Bidirectional over HDBaseT 1x 3-pin Phoenix Connector | Bidirectional over HDBaseT
POWER
Power Supply

Input: 100~240V AC 50/60Hz

Output: 12V DC 1A

Input: 100~240V AC 50/60Hz 

Output: 12V DC 2A

PoH 48V 15.4W 48V 15.4W
Max Power Consumption 25W 7.2W
 
ENVIRONMENTAL
Operating Temperature 32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature -4°F to ~ 158°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
-4°F to ~ 158°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
 
DIMENSIONS & WEIGHT
Rack Units/Wall Box N/A 1U
Height 105.6mm/4.16in 18mm/0.71in
Width 91mm/3.58in 232mm/9.14in
Depth 29.4mm/1.16in 93mm/3.67in
Weight 0.2kg/0.44lbs 0.5kg/1.1lbs
 
REGULATORY
Safety and Emission CE | FCC | RoHS

CE | FCC | RoHS