WyreStorm 4K Test Kit

Categories:
Part Number TT-KIT-4K

Two Devices. One Kit. Zero installation problems

Consisting of a 4K timing signal generator and a 4K source signal analyzer, the TT-KIT-4K is an essential addition to any integrator's toolbox to determine signal properties and compatibility of installed devices or cables and help quickly and reliably identify potential hardware or cable issues to ensure projects are completed as efficiently as possible.

Key Features:

  • Capable of producing and analyzing video signals up to 4096 x 2160p @60Hz 4:2:0
  • Consists of two rechargeable, lithium battery-powered units (signal generator and signal analyzer) in a rugged carry case 
  • Signal generator produces signals with or without HDCP and up to 8 channels of digital audio
  • Unmanned monitor mode on Signal Analyzer enables independent assessment of signal stability over time to identify potential issues within a distribution
  • Can be connected to a PC for additional recording and monitoring of the signal

Overview

Qualifying an installation is made simple and affordable with the WyreStorm TT-KIT-4K - powerful new signal test equipment comprising of a 4K HDMI Timing Signal Generator (TT-GEN-4K) and 4K HDMI Source Signal Analyzer (TT-SIG-4K) supporting all resolutions up to full UHD 4K.

The Signal Generator uses advanced internal software and a 1” display to set timing, including virtually any resolution imaginable, refresh rates or scan types and sync polarity as well as pattern type used to test color, gradient, detail, motion and 3D.

Offering 34 separate signal patterns and 32 pre-sets, 10 user definable and an auto-detection setting for timing signals, the signal generator is capable of replicating a wide range of signal configurations, including signals containing HDCP 1.4 encryption and up to 8 channels of audio.

Signal types, color space and depth can also be set and audio types up to 8.1 can also be tested using 3.5mm jack input, with audio capable of being embedded over the image. Finally, the powerful feature set is rounded off with an EDID setting to read, store and recall EDID codes to ensure total compatibility between connected devices in the installation.

Similarly, the Source Signal Analyzer tests timing at the display location by displaying data of incoming signals to ensure it matches what is being transmitted. A built-in 2” OLED screen to displays video transmissions up to 4096x2160p @ 60Hz 4:2:0 and incoming signal metadata to confirm correct render of image and with up to 8 channels of incoming audio assessed to evaluate audio signal level and quality. 

In terms of EDID, the Signal Analyzer can mimic any screen or projector by storing its EDID for the integrator to recall anywhere to test an installation without needing to have any screens on site. In addition, it also features a ‘monitor’ function that can be used to test a signal over a defined period of time, enabling the installer to leave the device unmanned on-site all day or night if necessary to analyze every minute/hour of use to identify any issues on-site that may be affecting distribution within a system for an invaluable time and cost saving method of testing or troubleshooting systems.

The TT-KIT-4K offers complete examination and diagnosis of transmissions from any source to all displays to ensure greatly improved interrogation of project distribution between devices for even greater signal accuracy and compatibility and even more efficient installations – a must have for all professional integrators.

Features

  • Professional installer 4K HDMI test kit designed for engineers and installers comprising of 4K HDMI Timing Signal Generator (TT-GEN-4K) and 4K HDMI Source Signal Analyzer (TT-SIG-4K) supporting all resolutions up to full UltraHD
  • Capable of producing and analyzing video signals up to 4096 x 2160p @60Hz 4:2:0
  • Support latest 4Kx2K resolution at 24Hz/25Hz/30Hz/50Hz/60Hz and 3D up to 1080p (Note: 4K 50/60Hz YCC420 HDMI 2.0 only) 
  • Supports RGB 4:4:4, YUV 4:2:2, YUV 4:2:0 and Deep Color 
  • 32 pre-set and 10 user definable timing signals, including an auto-detect setting
  • 34 separate signal patterns generated, including 3D 
  • Capable of replicating a wide range of signal configurations, including HDCP 1.4 encryption
  • Signal generator produces signals with or without HDCP and up to 8 channels of digital audio
  • Unmanned monitor mode on Signal Analyzer enables independent assessment of signal stability over time to help identify potential issues within a distribution
  • Can be connected to a PC for additional recording and monitoring of the signal
  • Units powered by rechargeable lithium batteries for hours of life per charge with no mains power required on site
  • Very low power consumption (<0.4A at 5V) 
  • Energy-efficient OLED screens to display received signal and data with on-screen display (OSD) user interface
  • OSD also displays audio information with an mini-jack for analog audio output to headphones or speakers (Note: PCM audio only)
  • EDID managed by PC control software with 4 fixed EDID settings and 10 slots for saved user defined EDID 
  • HDMI receive module can be powered down and powered on to emulate HDMI display device power on/off
  • Includes rugged carry case designed for the rigors of life on-site
  • Compact, light and highly portable
  • All cables, power supplies and mounting brackets supplied
  • 2 year warranty

In the Box

TT-KIT-4K consisting of:

1 x WyreStorm TT-GEN-4K 4K HDMI Timing Signal Generator

1 x WyreStorm TT-SIG-4K 4K HDMI Source Signal Analyzer 

2 x 5V 1A power supplies

2 x Pairs mounting brackets

2 x 1.2m USB cable

1 x DB9 to 3pin Phoenix cable

4 x Phoenix plugs

1 x Quickstart guide (Quickstart and full instruction manual also downloadable from this product page)

 

Specifications

117mm x 44mm x 98mm/4.6" x 1.73" x 3.85" (each unit)
630g/1.38lbs (each unit)

HDMI Supported: HDMI 2.0/DVI

HDCP Version: 1.4

Video Input: HDMI

Video Output: HDMI 

Video Bandwidth: Up to 9.0GHz (3.0GHz per channel)

Color Depth: 24bit, 30bit, 36bit, 48bit

Audio Input: HDMI

Audio Output: HDMI

Resolution (max.): 3840x2160p @30Hz 4:4:4, 4096x2160p @30Hz 4:4:4, 3840x2160p @60Hz 4:2:0

Embedded Timing: 32 sets (including 4K @ 30Hz, 4K @ 25Hz, 4K @ 24Hz, HDMI 2.0 4K @ 50Hz, HDMI 2.0 4K @ 60Hz, 720p 3D, 1080p 3D fixed timing and 1 x AUTO mode

User Defined Timing: 10 Sets

Pattern: 33 (32 x 2D pattern and 1 x 3D pattern)

Color Space: RGB 4:4:4, YUV 4:4:4, YUV 4:2:2, YUV 4:2:0 (HDMI® 2.0 only)

Audio Bit: 16bit, 20bit, 24bit

Audio Sample Rate: 32K, 44K, 48K, 88K, 96K, 176K, 192K

Vertical Frequency Range: <=120 Hz

Power Supply: DC 5V/2A 

Power Consumption (max.): 2 Watts

Battery: 2500mAh

Battery Charging current: 600mA

Battery Model: Li-ion 18650

Battery Charge Time (dead to full charge):  5 hours

Chassis Housing: Metal

Control: Front panel push button, USB, RS232

Operating Humidity Range: 10% to 90%, non-condensing

Operating Temperature Range: 32°F to 113°F (0°C to 45°C)

Input Video Signal: 1.2 volts p-p

Input DDC Signal: 5 volts p-p (TTL) 

Transmission distance: HDMI 15m/49ft 

Video Format Supported: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p @ up to 60Hz,( 3840 (UHD) and 4096 (DCI) x 2160p

Output Video: HDMI 1.4 with HDCP

Audio Format Supported: PCM only

Output Bandwidth Signalling Rate: 10.2Gbps

Maximum Pixel Clock: 297MHz

Video Impedance: 100 Ω

Audio Impedance: 75 Ω

ESD Protection: Human Body Model ±8kV (air-gap discharge) ±4kV (contact discharge)

Surge Protection: Voltage: ±1kV

Certification: CE, FCC, RoHS