WyreStorm HDBaseT Receiver with 2-Way IR and RS232 (70m/230ft)

Categories:
Part Number RX-70-PP

Think Thin.

As part of the WyreStorm PP range, the slim-line RX-70-PP Display Receiver features HDBaseT™ Class B distribution of full 1080p HD video, audio and two-way control when connected to a WyreStorm HDBaseT transmission device such as PP HDBaseT matrix switchers, HDBaseT Class A transmitter or AMP-001-010 digital audio amplifier, all wrapped up in an impossibly thin chassis for the the epitome of convenience and ease of installation at the display point.

Key Features:

  • Low Profile chassis height of just 15mm/0.6" greater convenience and flush installations behind screens
  • HDBaseT feature set supporting 1080p/36bit @ 60Hz video, HD audio, two-way IR
  • Switchable RS232 for firmware update or serial control when connected to compatible transmission device

Overview

As part of the WyreStorm PP range, the slim-line RX-70-PP Display Receiver offers HDBaseT Class B distribution when connected to a WyreStorm HDBaseT transmission device such as PP matrix switchers, HDBaseT transmitter or AMP-001-010 digital audio amplifier. 

Supporting a feature set including 70m/230ft transmissions of Full HD 1080p@60Hz video with 36bit deep color, HD audio and discrete bidirectional IR control IR, the RX-70-PP also features RS232 with switchable selection for firmware updates, all along a single Cat5ei/6 cable to display devices. 

Pushing chassis design to the limit, the RX-70-PP offers an incredibly low-profile for a greatly reduced form factor behind the screen for even more convenience and ease of installation at the display zone. 

Featuring threaded bushings that allow use of both standard and locking DC power plugs for improved connection options, the RX-70-PP also includes LED indication for power supply, signal status to show established connection to display, transmission link and HDCP confirmation to illustrate the presence of encryption within a signal. 

WyreStorm Pro Plus HDBaseT products offer flexibility combined with an ease of use and cost-efficiency to provide solutions where reliabile HD transmission and control over distance is required whether in a residential or commercial setting. 

Features

  • Display Receivers capable of 1080p HD video @60Hz and HD multichannel audio transmissions up to 70m/230ft under recommended conditions* 
  • Low profile chassis of 15mm / 0.59” for easier, more convenient installations behind screens at display zones. 
  • Transmits discrete wide-band two-way IR control signal together within the HDMI signal over a single Cat5ei/6. 
  • Robust Class B HDBaseT transmission technology for more affordable HD distribution and control whilst retaining the trademark HDBaseT stability and resistance to electrostatic and environmental interference compared to conventional UTP transmission. 
  • Supports all high definition resolutions: 1080p, 1080i, 720p with screen refresh rates of 24Hz, 30Hz, 50Hz and 60Hz. 
  • HDMI v1.4 with full 3D compatibility with frame packing/ sequential (Blu-Ray) and interlaced stereoscopic (satellite/ cable broadcasts) 
  • Switchable RS232 for firmware update. Supports serial control via RS232 if connected to a compatible HDBaseT transmission device with routable RS232 - check website for compatibility
  • Receivers cascadable up to 7 times within a single output zone (7 x 70m/230ft) using another Class B HDBaseT transmission device. 
  • Supports 36bit Deep Colour 
  • Cablei termination follows IEEE-568B standards 
  • HDCP compliant 
  • Automatically adjusts feedback, equalization and amplification of signal for easy installation. 
  • Threaded bushings on receivers allow use of both standard and locking DC power plugs 
  • LED indication for visual power supply to receiver, signal status to show established connection to display, HDBaseT link to matrix and HDCP confirmation to illustrate the presence of encryption within a signal 
  • 3 year warranty

*Recommended transmission conditions denote cable run within specified distance range of product, no electrical interference, the use of straight cable runs with no bends or kinks and no patch panels or wall outlets used. Please be advised that the presence of any of these factors in your installation may compromise bandwidth and signal strength. 

For longer transmission distance, Ethernet pass- through, to enable devices with 4k resolution or for 48bit Deep Colour compatibility, please see our range of full HDBaseT receivers and extender sets. 

In the Box

  • 1 x WyreStorm RX-70-PP Display Receiver 
  • 1 x Printed quickstart guide*
  • 1 x Receiver mounting brackets (pair) 
  • 1 x 12V/1.5A DC power supply 
  • 1 x Wide-band IR TX Emitter 
  • 1 x Wide-band IR RX Receiver (30-50KHz) 
  • 1 x 3.5mm Phoenix male Connector (3 pin) 

*Quickstart and full manual downloadable from product page at www.wyrestorm.com 

Specifications

135mm / 5.3” x 15mm / 0.6” x 74mm / 2.9”
240g / 8.46oz
32°F to 95°F (0°C to 35°C) 10% to 90%, non-condensing
-4°F to 140°F (-20°C to 70°C) 10% to 90%, non-condensing
6.75Gbps
HDBT
5 volts p-p (TTL)
1080p 36bit Deep Colour
1080p transmissions up to 70m / 230ft using Cat5e/6 (Under perfect transmission conditions including straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets.)

VESA: 640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080 1920x1200 DTV/HDTV: 480i/567i/480p/567p/720p/1080i/1080p

HDMI v1.4 with full 3D compatibility with frame packing/ sequential (Blu-ray) and interlaced stereoscopic (satellite/cable broadcasts), supporting 1080p/1080i/720p/576p/480p/576i/480i

DTS-HD, Dolby True HD
12V/1.5A DC - local power
9W
25.9
N/A

Video Impedence: 100 Ω

Maximum Pixel Clock: 148.5 MHz (1080p)

ESD Protection: ±8kV (Air-gap discharge), ±4kV (Contact discharge) 

Surge Protection: IEC 61000-4-4 (EFT) 40A (5/50ns); IEC 61000-4-5 (Lightning) 25A (8/20μs) 

Cat5e/6 Cable Specifications: 70m/230ft: 1080p, 60Hz, 36bit deep colour, 35m/114: 1080p, 60Hz, 48bit deep colour / 1080p, 60Hz, 3D Note: HDBaseT certified, straight-through T568B standard cables strongly recommended