NetworkHD™ 200 Series AV Over IP H.264 Decoder with Video Wall Processing

Categories:
Part Number NHD-210-RX

The NHD-210-RX decoder offers matrix switching and video wall functionality up to 4x4 screens when paired with an NHD-200-TX encoder for multi-format input transmissions of DVI, HDMI, Component and VGA including HDMI and analog audio breakout outputs.

Sharing many of the same benefits as its 100 Series sibling, the 200Series offers configurable high quality, low-bandwidth H.264 compression supporting 1920x1200@60fps at 40Mb/s and below, and instant switching between sources with both high and low latency modes, but with powerful video wall functionality over LAN that makes it the best all-round solution for commercial AV installations.

Key Features:

  • Multi-format HD over IP AV distribution solution utilising H.264 compression for matrix switching
  • Offers video wall functionality up to 16x16 screens and matrix switching
  • HDMI and analog audio breakout outputs
  • Instant switching between video sources with both high quality and low latency modes
  • Plug and Play configuration with auto IP addressing and Bonjour discovery of components
  • NetworkHD Touch iPad control app for live video previews and drag and drop source selection

Overview

The NetworkHD™ 200 Series is a matrix-based AV over IP solution for distrubution of multiple HD content and sources to multiple HD display devices over a network.  With its simple system configuration and robust feature set, it provides the best value in networked video distribution, without compromising quality. 

The 200 Series shares many of the same benefits as its smaller sibling, including configurable high quality low-bandwidth H.264 compression supporting 1920x1200@60fps at 40Mb/s and below, and instant switching between sources with both high and low latency modes, but with powerful video wall functionality over LAN that makes it the best all-round solution for commercial AV installations.

The NHD-210-RX decoder offers matrix switching and video wall functionality up to 16x16 screens when paired with an NHD-200-TX encoder for multi-format input transmissions of DVI, HDMI, Component and VGA including HDMI and analog audio breakout outputs.

Offering plug and play configuration with auto IP addressing and Bonjour discovery of components significantly simplifies initial set up and configuration as well as future expansion of the system. 

With HDMI and analog audio breakout outputs, POE support and bidirectional RS-232, NetworkHD is compatible with the WyreStorm Enado control interface for an effortless creation of scalable ‘one-manufacturer’ total HD distribution and control over IP solution.  What's more, the 200 Series is also compatible with the award-winning NetworkHD Touch app for iPad, giving access to all sources and displays in a NetworkHD system, including live video previews and drag and drop selection at the flick of a finger.

Such flexibility and functionality sees NetworkHD 200-Series applications extend to not only digital signage, but also hospitality, education, corporate installations of any size, allowing projects to grow simply and cost effectively as the needs of the client change.

Features

  • Highly scalable, high quality low-bandwidth solution using the most efficient compression technologies to allow for very large commercial AV deployments 
  • NetworkHD Touch iPad control app for live video previews and drag and drop source selection
  • Offers video wall functionality up to 16x16 screens
  • Matrix switching functionality
  • Compatible with NHD-000-CTL controller and NHD-200-TX encoder
  • Plug and Play setup with quick networking configuration and auto discovery of components 
  • Quick Sync™ technology for virtually instantaneous seamless switching 
  • Full RS-232 control of connected displays and CEC One-Touch Play 
  • Major control systems drivers available including the WyreStorm Enado™ Control System 
  • Supports video previewing on a PC or third party device. Capable of outputting two simultaneous IP streams. One large IP stream supports a streaming resolution from 480p @ 60Hz to 1920 x 1200 @ 60Hz to view a video on the decoder. The other small one supports resolutions of 352 x 288 @ 5Hz to easily preview a video from the encoder on a PC or Mac 
  • Use with the new NetworkHD controller (NHD-000-CTL) for matrix control and management via the LAN, as well as for allowing control from third party control system such as AMX, Crestron, Control4, RTI & Enado. 
  • Supports PoE to be remotely powered by compatible power source equipment, eliminating the need for a nearby power outlet 
  • Standards-based H.264/MPEG-4 AVC video compression 
  • Full PC control suite available free of charge at wyrestorm.com 
  • Supports HDCP 
  • Supports the H.264 features baseline profile, main profile and high profile 
  • Auto input format detection 
  • Configurable encoding bit rate up to 40 Mbps 
  • Supports PoE for remote powered from the switch, eliminating the need for a nearby power outlet 
  • Supports AutoIP, zero-configuration networking (zeroconf), a set of technologies that automatically assigns dynamic IP addresses to the Encoder on start-up and a server-less method of choosing IP addresses 

In the Box

1 x NHD-210-RX Main Unit 

1 x Power Adapter (12V 1A DC) 

1 x Detachable Plug 

3 x Phoenix Conn. (Male, 3.5 mm, 3 pins) 

2 x Mounting Brackets 

1 x Quickstart guide (also downloadable from this product page)

Specifications

228mm x 25 mm x 111mm / 9’.0’ x 1.0’’ x 4.4’’
0.6Kg / 1.3lbs
12V 1A DC
6W (Max.)

Operating Temperature: +32°F ~ +113°F (0°C ~ +45°C) 10% ~ 90%, non-condensing  

Storage Temperature: -4°F ~ 140°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing  

Input Video Ports: 1 × LAN  

Input Video Type: H.264/MPEG-4 AVC  

Input Video Resolutions: 480p @ 60Hz ~ 1920 x 1200 @ 60Hz 

Output Video Ports: 1 x HDMI   

Output Video Type: HDMI 1.3  

Output Video Resolutions: 

    HDMI: 480p @ 60Hz, 576p @ 50Hz, 800 x 600 @ 60Hz, 1024 x 768 @ 60Hz, 720p @ 50Hz, 720p @ 60Hz, 1280 x 800 @ 60Hz, 1280 x 1024 @ 60Hz, 1366 x 768 @ 60Hz, 1440 x 900 @ 60Hz, 1600 x 1200 @ 60Hz, 1680 x 1050 @ 60Hz, 1080p @ 24Hz, 1080p @ 25Hz, 1080p @ 30Hz, 1080p @ 50Hz, 1080p @ 60Hz, 1920 x 1200 @ 60Hz   

Video Impedance: 100 Ω  

End-to-End Time Latency: Approx. 60 ms-90 ms (Low latency mode), Approx. 250 ms-300 ms (High quality mode)  

Input Audio Port: 1 x LAN 

Input Audio Format: Audio embedded in streaming media input

Output Audio Ports: 1 x Phoenix Connector 

Output Audio Format: Stereo 

Control Method: PC configurator and RS232 

ESD Protection: ±8kV (air-gap discharge) ±4kV (contact discharge) 

Surge Protection: Voltage ±1 kV 

Certification: CE, FCC, RoHS compliant