6x6 HDBaseT Matrix Switcher with HDMI Mirror Outputs, Bidirectional IR, Routed RS-232 and PoH

Categories:
Part Number MX-0606-PP-POH

Looking to reliably distribute up to six HD sources to up to six HD display zones over distance with flexibility of control and installation?  Look no further than the MX-0606-PP-POH for medium-sized residential or light commercial applications of any kind.

A new addition to WyreStorm's PP-POH line of matrix solutions, the MX-0606-PP-POH features rock solid HDBaseT Class B platform to support transmissions of 1080p@60Hz 36bit deep colour video, multi-channel digital audio up to 7.1, 2way IR control and routable RS-232 for serial control of display zones up to 70m/230ft.

Integrated PoH is also included to remotely power receivers from the matrix for installation flexibility and convenience, while actively reducing system complexity and potential points of failure for an unbeatable combination of features, reliability and affordability.

Key Features

  • 6x6 HDBaseT matrix switcher for distribution of full HD video, audio and 2way control over single Cat5/6 cable
  • Supports 1080p@60Hz 36bit, DTS-HD and Dolby TrueHD audio, 2way IR and central RS-232 matrix control up to 70m/230ft
  • PoH allows remote powering of receivers by the matrix, removing need local power at display zones
  • Includes 6x HDMI outputs mirrored to HDBaseT outputs for connection of additional local displays, AVR or extender products to further lengthen transmission
  • Comprehensive EDID Management  |  New web interface for LAN control  |  QuickSync™ technology enables instant switching between sources

Overview

WyreStorm MX-PP-POH matrices expand on the PP matrix range by offering all the strengths of PP HDBaseT distribution of full 1080p HD video, audio and bidirectional IR control of sources and displays, with the added benefit of PoH (Power-over-HDBaseT) and routable serial control capabilities.

More Power

PoH enables power to be passed along the cable along with transmissions  for receivers to operate without the need for local mains power at display zones for greater flexibility and convenience during installation as well as improved  energy efficiency compared to a permanent mains connection.

More Control

Routable serial control via RS-232 allow control of all connected display devices, with protocols for leading control systems available on this product page – all of which adds up to an incredibly powerful package for residential and commercial applications of any size or budget.

Transmission

  • 6 x TX-POH-010 transmission cards, each offering HDBaseT In, HDMI In, HDMI Out and IR In.  As the "default” card on all non-CUSTOM MX-PP-POH matrix models, this transmission offers 70m/230ft HDBaseT transmission including Video, Audio, Control & Power, combined with a duplicate HDMI output to allow simultaneous connection of another mirrored local display device, AVR or extender product. IR in allows control signals to be sent to the sink device.

More Options

Available as both a fixed, out-of-the-box HDMI/HDBaseT switching solution or a fully custom-built multi-format modular matrix the MX-PP-POH range is designed to deliver the ultimate level of switching performance, reliability and installation versatility.

Award-winning Audio Integration 

Combine the WyreStorm AMP-001-010 HDBaseT Digital Amplifier to MX-PP-POH outputs to create a self-contained, video and audio distribution solution with full HD capabilities, with EDID management, HDCP compliance and complete control of all connected devices.

* When using shielded cable, please ensure you use shielded RJ45 connectors and terminate the grounding wire at both ends of the cable.

Features

  • 6x6 full HD Matrix Switcher
  • Class B HDBaseT technology for one-cable transmissions of 36bit Deep Color Full 1080p HD video @60Hz, HD audio, bidirectional IR and routed serial control with low voltage Power-over-HDBaseT up to 70m/230ft.
  • Featuring 6 x TX-POH-010 HDBaseT Out, HDMI Out, HDMI In, IR In transmission cards 
  • Duplicate HDMI output to allow simultaneous connection of a second local ‘mirrored’ screen, AVR or extender product
  • IR in allows control signals to be sent to the sink device
  • Fully 3D compatible – Frame packing/sequential (Blu-ray) and Interlaced Stereoscopic (Satellite/Cablei broadcasts)
  • Routed RS-232 allows serial control of all connected output devices 
  • PoH – power passed directly along Cat5ei/6 cable up to 70m/230ft from the MX-0808-PP-POH matrix to all connected PoH-enabled display receivers so no additional power is required at display location
  • Each output can be cascaded up to 7 times for even larger distributions spanning 56 displays covering a transmission distance of up to 3.9Km/ 2.4miles
  • Modular design enables transmission cards to be quickly and easily replaced or upgraded with faster on-site changes than ever before
  • HDCP compliant
  • Reads and copies EDID from connected devices with additional EDID configuration through customizable DIP switch settings if necessary
  • The same robust transmission technology as full HDBaseT that is far more resistant to electrostatic interference than conventional distribution
  • Fully compatible with the WyreStorm Enado user interface and all market leading third party control systems with full integration protocols available for AMX, Control 4, Crestron, Red Eye, Nevo, RTI, Control FX, Savant, Bit Wise and more
  • Wide range, two-way discrete IR control between source and display and vice versa (30 KHz to 56 KHz frequency)
  • Choose from 5 switching modes – infrared remote control, front panel buttons, local IR, IR call-back, and RS-232
  • Simple switching remote control included, which can also be learned into a universal remote handset to allow the control of multiple devices from one handset
  • Conforms to IEEE-568B standards
  • Compact 2U size
  • Additional infrared extension port for longer IR connections
  • Includes mounting brackets, IR receivers, IR transmitters and a remote control handset
  • 3 year warranty

In the Box

1x MX-0606-PP-POH Matrix Switcher 

1x IR Remote Handset 

1x IR Receiver (38khz) 

6x Wide-band IR Receivers (30-50kHz) 

6x IR Emitters 

1x 100~240V AC 50/60Hz Power Cord with US Plug 

1x 100~240V AC 50/60Hz Power Cord with UK Plug 

1x 100~240V AC 50/60Hz Power Cord with EU Plug 

2x Mounting Brackets 

1x Quickstart Guide

Specifications

Audio and Video

Inputs
6x HDMI 19-pin type A
Outputs
6x HDMI 19-pin type A (mirrors HDBaseT)
6x HDBaseT 8-pin RJ-45 female
Audio Formats
2ch analog and Up to DTS-HD and Dolby TrueHD
Video Resolutions (Max)
Using HDMI
1920x1080 @60Hz 36bit 15m/50ft
 
Using Cat6/6a/7
1920x1080 @60Hz 36bit up to 70m/230ft
Color Depth
36bit
Maximum Pixel Clock
225MHz

Communication and Control

HDMI
HDCP compliant | EDID
DVI/D supported with adapter (not included)
HDBaseT
HDCP compliant | EDID | PoH (1way) | Bidirectional IR 
Ethernet
N/A
IR
1x IR Ext - 3.5mm (1/8in) Stereo | Matrix Control
6x IR RX - 3.5mm (1/8in) Stereo
6x IR TX - 3.5mm (1/8in) Mono
Bidirectional over HDBaseT
RS-232
Matrix Control | Firmware Updates
Audio Return Channel (ARC)
N/A
Power
Power Supply
Input: 100~240V AC 50/60Hz
PoH (1-way)
48V 15.4W (each HDBT output)
Max Power Consumption
125 W

Environmental

Operating Temperature
32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature
-4°F to ~ 158°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Maximum BTU
426.5 BTU/hr

Dimensions and Weight

Rack Units/Wall Box
3U
Height 100mm/3.94in
Width
440mm/17.33in
Depth
340mm/13.39in
Weight
6.7kg/14.74lbs

Regulatory

Safety and Emission
CE | FCC | RoHS