WyreStorm 4x4 HDBaseT Matrix PoH Switcher Kit with 4 x POH 70m/230ft Receivers

Categories:
Part Number MX-0404-POH-KIT

Flexible, powerful, convenient and affordable; the WyreStorm MX-0404-POH-KIT offers the integrator the best of all worlds with a combined HDBaseT PoH matrix and PoH display receiver solution offering remote power to display zones for plug-and-play simplicity for small-to-medium sized distribution and control integrations. 

Key features include:

  • 4x4 HDBaseT Matrix HD switcher and 4 x Slimline HDBaseT Display Receivers for quick and easy installation straight out of the box
  • Power-over-HDBaseT (PoH) technology enables receivers to be remotely powered by the matrix for no local power connectivity required at display zones
  • Capable of 1080p/36bit HD video @60Hz, HD multichannel audio, two-way IR control and central RS232 matrix control up to 70m/230ft per output
  • WyreStorm QuickSync technology allows for instant seamless switching of sources

Overview

Flexible, powerful, convenient and affordable; the WyreStorm MX-0404-POH-KIT offers the integrator the best of all worlds with a combined HDBaseT™ PoH matrix and PoH display receiver solution offering remote power to display zones for plug-and-play simplicity for small-to-medium sized distribution and control integrations. 

The MX-0404-POH-KIT features high quality, low latency HDBaseT Class B technology for 4x4 distribution and matrix switching over a single Cat5e/6 cable with four matching slim-line PoH display receivers of just 15mm height for the lowest form factor available on the market, more than capable of installation behind even the slimmest display wall plates.

Allowing connected HDMI inputs to be distributed independently and simultaneously over distances of up to 70m/230ft to any display receivers connected to the matrix, regardless of HDCP encryption, the MX-0404-POH-KIT offers HDBaseT signal stability for the transmission of lossless 1080p HD Video up to 60Hz / 36bit, HD multichannel audio, bidirectional control via IR from a centralized AV location to displays using unshielded or shielded Cat5e/6 cable*, with further control via RS232 including full compatibility with leading control systems.

PoH (Power-over-HDBaseT) enables power to be passed along the cable along with transmissions from the matrix to power receivers at display zones without the need for local mains power for greater flexibility and convenience during installation as well as improved energy efficiency compared to a permanent mains connection.

The system offers flexibility and reliability of signal distribution, combined with innovative features and an ease of use to deliver HD audio and video and power, controlled via IR, RS232 or LAN, all on a single Cat5e/6 cable that removes the need for additional control, video cables and power supplies on installations, whether in a residential or commercial setting. 

All of which guarantees a quick, hassle-free installation, whatever the application, for the very best in reliable and affordable single cable AV distribution and control.

Features

MATRIX 

  • 4x4 HDBaseT Matrix HD Switcher and 4 HDBaseT Display Receivers - quick and easy installation straight out of the box
  • Input: 4x HDMI Output: 4x HDBaseT with integrated RJ45 connectors for a single Cat5e/6 UTP cable to each display point for ease of installation 
  • Enables up to 4 HDMI video/audio devices to be independently switched through up to 4 HDMI displays or projectors for uncompressed digital distribution 
  • Class B HDBaseT - same robust HDBaseT transmission technology far more resistant to electrostatic interference than conventional UTP distribution
  • Power-over-HDBaseT (PoH) - low-voltage power passed directly along Cat5e/6 up to 70m/230ft from matrix to all connected PoH-enabled receivers so no additional power supply is required at display locations
  • Capable of 1080p HD video @60Hz and HD multichannel audio distribution, bidirectional control via IR and RS232 up to 70m/230ft per output
  • Supports all high definition resolutions up to and including 1080p and standard video formats 
  • 2K resolution 
  • Each output able to show any connected source simultaneously regardless of whether the input carries HDCP encryption. 
  • Each HDMI port also supports DVI inputs 
  • 36bit Deep Color supported 
  • HDMI v1.4 with full 3D compatibility with frame packing/ sequential (Blu-ray) and interlaced stereoscopic (satellite/ cable broadcasts) 
  • HDCP compliant with constant feed to prevent screen drop-outs  
  • Reads and copies EDID from connected devices with additional EDID configuration through customizable DIP switch settings if necessary  
  • Central RS232 control – fully compatible with all market leading control systems with full integration protocols available - check website for listing 
  • LAN control – with LAN protocols available for leading control systems
  • Wide range, bidirectional discrete IR control between source and display and vice versa (30 KHz to 56 KHz frequency) 
  • 6.75Gb/s bandwidth range/signaling rate 
  • Choose from 6 Matrix switching methods – infrared remote control, front panel buttons, local IR, IR call-back, RS232 and LAN 
  • Simple switching matrix remote control included, which can also be learned into a universal remote handset to allow the control of multiple devices from one handset 
  • 4 x IR 3.5mm mini-jack ports for each output 
  • Additional infrared extension
  • Suitable for residential or commercial installation 
  • Conforms to IEEE-568B standards
  • 3 year warranty

 

ADDITIONAL FEATURES ON RECEIVERS

  • Low profile 18mm chassis height for convenient installation at display zones, even behind the slimmest wall plates.
  • Multichannel audio supports 7.1 DT Master HD and Dolby True HD
  • Power-over-HDBaseT (PoH) - low-voltage power passed directly along Cat5e/6 up to 70m/230ft from matrix to all connected PoH-enabled receivers so no additional power supply is required at display locations
  • Additional power connectivity via threaded bushings for both standard and locking DC power plugs and phoenix connector 
  • Automatically adjusts feedback, equalization and amplification of signal for easy installation. 
  • Switchable RS232 for firmware updates or third party control of matrix switching from display zones with open source integration protocols available for market leading control systems 
  • LED indication for visual power supply to receiver via PoH or mains, signal status to show established connection to display, HDBaseT link to matrix and HDCP confirmation to illustrate the presence of encryption within a signal 

In the Box

  • 1 x 4x4 HDBaseT POH matrix
  • 4 x HDBaseT POH display receivers
  • 1 x Printed quickstart guide (quickstart and full instruction manual downloadable on this product page)
  • 1 x (pair) mounting brackets (matrix)
  • 4 x (pairs) mounting brackets (receivers)
  • 8 x IR TX emitters (matrix/receivers)
  • 9 x IR RX receivers (8 for matrix/receivers, 1 for matrix IR EXT connection)
  • 1 x MX-0404-PP-POH-KIT remote control (matrix) - size/type: CR2025 3V
  • 1 x 24V DC US/UK/EU power cable (matrix)
  • Accessories (mounting bracket screws, matrix HDMI port dust covers)

 

Specifications

MATRIX 440mm x 43.5mm x 171.4mm / 17.3" x 1.7" x 6.7" - RECEIVER (each) 181.7mm x 18mm x 94mm / 7.15" x 0.71" x 3.70"
MATRIX 2kg / 4.4lbs - RECEIVER (each) 0.4kg / 2.2Ibs
32°F ~ 113°F (0°C ~ 45°C) 10% ~ 90%, non-condensing
5 to 90 % RH (no condensation)
6.75Gbps
Input video Signal - 0.5~1.2 Vp-p
Input DDC Signal - 5 volts p-p (TTL)
Maximum Signal Link Range - 1080p 36bit Deep Color
1080p @60Hz signal up to 70m/230ft using WyreStorm 70m HDBaseT receivers behind each display (Under recommended transmission conditions including straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets)

480i, 576i, 480p, 576p, 720p@50, 720p@60,1080p@24, 1080i@25, 1080i@30, 1080p@30, 1080p@50, 1080p@60 (Resolution@Hz)

HDMI 1.4 with HDCP + full 3D (up to 1080p) - frame packing (Blu-ray) & stereoscopic (satellite/cable)

Multichannel audio - DTS-HD 5.1 / 7.1, Dolby HD 5.1 / 7.1
24V DC
MATRIX: 55.6w max. (with PoH), 27.5w max (without PoH), RECEIVER: 6.6w
189.7 (with PoH), 93.6 (without PoH)
1U

I/O Connections:

MATRIX

  • 4 x HDMI IN 
  • 4 x HDBaseT OUT 
  • 1 x RS232 
  • 1 x IR EXT 
  • 1 x EDID DIP switch 

 

RECEIVER

  • 1 x HDBaseT IN
  • 1 x HDMI OUT

Control Method: IR control / Front panel buttons / RS232 / LAN 

Maximum Pixel Clock: 225MHz 

Video Impedance: 100 Ω 

ESD Protection: ±8kV (air-gap discharge) ±4kV (contact discharge) 

Surge Protection: Voltage: ±1kV 

Certification: CE, FCC, RoHS, HDBaseT

Cable Specifications:

NOTE: Cable types below are for reference only. This product is tested using WyreStorm HDMI cables - we recommend use of WyreStorm cables for guaranteed quality and reliability of transmission when dealing with UHD 4K content. 

Ensure cables and connections are in good condition, with no bends or kinks and no patch panels or wall outlets used. 

The presence of any of these factors may compromise bandwidth and signal strength. 

Cable Type             Range            Supported Video

  • HDMI 1.3            15m/49ft        1080p @ 60Hz with 36bit Deep Color including 3D               
  • Cat5e/6/6a/7       70m/230ft        As above