VGA/HDMI over HDBaseT Extender Set with Ethernet, IR & Serial and 2-way PoH

Categories:
Part Number EX-SW-0201-4K

Supporting resolutions up to 4K, this full-featured HDBaseT 5Play extender solution is designed for use in small meeting room or classroom environments where distribution and control of VGA with audio and HDMI devices up to 100m/328ft is required.

* * * Note:   This product replaces the  SW-0201-POH Switcher / Extender.

Key Features

  • HDBaseT 5Play Extender Set offering extension of 4K and HD Video, HD Audio, Ethernet, Power and control up to 100m/328ft using a single Cat6 cable
  • Auto-switching transmitter detects and selects VGA (+audio) and HDMI devices as soon as the source is connected
  • 2way PoH gives flexible installation options by allowing either the transmitter or receiver to be powered remotely
  • 3.5mm jack on receiver de-embeds HDMI or VGA audio from the incoming signal

 

Overview

With HDMI up to 4K@60Hz YUV4:2:0 and VGA up to 1920 x 1200@60Hz, the EX-SW-0201-4K extender set offers 5Play compliance for distribution of 4K and HD video, HD audio, bidirectional IR and RS-232 control of the HDMI source, 2way power and Ethernet using HDBaseT Class A technology for reliable transmission over distances up to 70m/230ft (4K) or 100m/328ft (1080p).

In addition, EDID and DIP setting management allows for RS-232 and Long Cable modes to be toggled, as well as the manual setting of resolutions for improved communication and compatibility between source and display devices.

The EX-SW-0201-4K auto-switching transmitter automatically detects and selects a newly connected HDMI or VGA device for minimal effort needed by the user and also features a 3.5mm stereo mini-jack audio input to embed audio within the VGA signal.

The EX-SW-0201-4K receiver delivers the transmitted 5Play signal to the display device with a 3.5mm mini-jack to de-embed audio from the incoming HDMI or VGA signal for connection to the display device or local speakers 

Both transmitter and receiver feature bidirectional PoH for either unit to be powered remotely by the other for an even more flexible installation, and also feature LED Power, Status, HDCP and Link indication to visually indicate signal activity and correct unit functionality.

Features

  • A full-featured 5-Play HDBaseT extender set with the added feature of a VGA/HDMI auto-switching transmitter
  • 5Play compliance supporting the extension of 4K and HD video, HD audio, Ethernet, Control and power along a single Cat6 cable
  • Transmit HD resolutions up to 1920x1200 to 100m/328ft
  • Transmit 4K@60Hz (4096x2160) to 70m/230ft
  • HDCP 2.2 compliant
  • 3D supported
  • Auto-switching transmitter detects and selects VGA (+audio) and HDMI devices as soon as the source is connected
  • Two-way PoH gives flexible installation options by allowing either the transmitter or receiver to be powered remotely
  • Audio embed on transmitter and audio de-embed on receiver via 3.5mm jack connection for HDMI or VGA
  • EDID management and DIP switch selection for manual setting of resolution, RS-232 control/firmware update function and long cable mode
  • Low-profile 18mm chassis for unobtrusive installation
  • Cablei termination follows IEEE-568B standards
  • LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link.
  • Threaded bushings allow use of both standard and locking DC power plugs
  • Energy efficient universal power supply included
  • Mounting brackets included
  • 3 year warranty

In the Box

1x EX-SW-0201-4K Transmitter

1x EX-SW-0201-4K Receiver

1x 12V DC 2A Power Supply (US/UK/EU)

2 x 3-pin Screw Down Phoenix Connectors

2x IR Emitters

2x Wide-band IR Receivers (30-50KHz)

4x Mounting Brackets (1pr for TX and 1pr for RX)

1x Quickstart Guide

Specifications

Audio and Video

Inputs
1x HDMI 19-pin type A
1x Audio In 3.5mm (1/8in) Stereo Jack
1x HDBT 8-pin RJ-45 female
Outputs
1x HDMI 19-pin type A
1x Audio Out 3.5mm (1/8in) Stereo Jack
1x HDBT 8-pin RJ-45 female
Audio Formats
2ch PCM | Up to 7.1 DTS-X and Dolby Atmos
Video Resolutions (Max)
HDMI
1920x1080 @60Hz 48bit (15m/50ft)
4096x2160pa @60Hz 24bit 4:2:0 (7m/23ft)
Using Cat5/5e
1920x1080 @60Hz 36bit (100m/328ft)
1920x1080 @60Hz 3D 36bit (100m/328ft)
Using Cat6/6a
1920x1080 @60Hz 36bit (150m/492ft)
1920x1080 @60Hz 3D 36bit (150m/492ft)
3840x2160p @24/25/30Hz 4:4:4 24bit (100m/328ft)
4096x2160p @60Hz 4:2:0 24bit (100m/328ft)
Color Depth
1080p: 48bit | 4K UHD:  24bit
Maximum Pixel Clock
297MHz

Communication and Control

HDMI
HDCP 2.2 | EDID |
DVI/D supported with adapter (not included)
HDBaseT
HDCP 2.2 | EDID | PoH (2-way) | Bidirectional IR and RS-232
Ethernet
1x 8-pin RJ-45 female
10/100 Mbps auto-negotiating
IR
1x IR TX 3.5mm (1/8in) Mono
1x IR RX 3.5mm (1/8in) Stereo
Bidirectional over HDBaseT
RS-232
1x 3-pin Screw Down Phoenix Connector
Bidirectional over HDBaseT

Power

Power Supply
Input: 100~240V AC 50/60Hz
Output: 12V DC 2A
Max Power Consumption
26.5W
PoH (2-way)
48V 15.4W

Environmental

Operating Temperature
32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature
-4°F to ~ 158°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing

Dimensions and Weight

Height
20mm/0.79in
Width
200mm/7.87in
Depth
134mm/5.28in
Weight
0.6kg/1.32lbs
Regulatory
Safety and Emission
CE | FCC