WyreStorm HDBaseT Extender Set with 2-Way IR and PoH (50m/164ft)

Categories:
Part Number EX-1UTP-IR-50-POH

* * * PHASE OUT PRODUCT * * *

The WyreStorm EX-1UTP-IR-50-POH single cable extender set features Class B HDBaseT technology and PoH for an even more affordable HDBaseT extender solution over shorter distances up to 50m/164ft.  

Designed for smaller projects that may not require the feature set of full HDBaseT yet still benefit from the signal stability and functions offered by this powerful technology, including distribution of full 1080p HD video, HD audio, bidirectional IR and remote power passed through a single Cat5e/6 cable from the transmitter to power the display receiver.

Overview

Designed with the needs of the installer in mind.

The EX-1UTP-IR-50-POH Extender set comprises of a Transmitter and Receiver to distribute full, uncompressed HD 1080p video @60Hz, HD multichannel audio with bidirectional discrete IR control of source and display from either location over distances of up to 50m/164ft using a single shielded or unshielded Cat5ei/6 cable.

Featuring Power-over-HDBaseT, the Transmitter draws 12v power from a mains supply and passes along the length of a single Cat5e/6 cable with the video, audio and control signals to power the receiver - no power access is necessary at the display location for ease of installation and connection; meaning no additional power adaptors required and improved energy efficiency.

Transmitters include EDID management to manually handle device communication via DIP switch setting, with Receivers containing long cable mode to further encourage successful transmission.  Both units also feature protection against ESD (electrostatic discharge) to further stabilise transmission with LED indication on the unit housing providing clear confirmation of power and signal link status.  Both units also contain DIP settings .

Additionally, the EX-1UTP-IR-50-POH is fully cascadable, with transmission lengthened by connecting to multiple 50m/164ft extender sets for increased distribution and even greater flexibility, whatever the installation environment.

Features

  • HDBaseT extenders capable of 1080p HD @60Hz and HD multichannel audio transmissions up to 50m (164ft) under perfect conditions*
  • Transmits discrete wide-band two-way IR control signal together within the HDMI signal over a single Cat5ei/6 cable
  • Power-over-HDBaseT (PoH) - 12v Mains connected Transmitters pass power along the Cat5e/6 to remotely power display receivers - no additional power required at display locations.
  • Fully supports 3D applications - frame packing/sequential (Blu-ray) and Interlaced Stereoscopic (satellite/cable broadcasts)
  • Supports 36bit Deep Colour
  • HDMI V1.4
  • Cablei termination follows IEEE-568B standards
  • HDCP compliant
  • Automatically adjusts feedback, equalization and amplification of signal for easy installation.
  • EDID management on Transmitter and DIP Setting on Receiver to aid communication between devices and transmission.
  • LED indication for visual power and HDMI / HDBaseT video signal status.
  • Fully cascadable to further lengthen transmission and increase your distribution capabilities.

*Perfect transmission conditions denote straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets.

In the Box

  • 1 x WyreStorm EX-1UTP-IR-50-POH TRANSMITTER 
  • 1 x WyreStorm EX-1UTP-IR-50-POH RECEIVER 
  • 1 x Printed quickstart installation guide (also downloadable from this product page)
  • 2 x pairs of balun mounting brackets
  • 1 x 12VDC power supply 
  • 1 x IR TX infrared Transmitter - for IR control of to Source device from display zone
  • 1 x IR RX infrared Receiver - to receive IR control signals in Display zone to Source.  (IR frequency range:  940nm IR Frequency: 38KHZ)

Specifications

120mm/4.72" x 24mm/0.94" x 101mm/3.97"
0.36kg / 0.79lb (each)
-5 to +35°C (-41 to +95 °F)
5 to 90 % RH (no condensation)
6.75Gbps
0.5-1.0 volts p-p
12 volts p-p TTL (Transmitter), 5 volts p-p TTL (Receiver)
1080p 36bit Deep Colour
1080p signal up to 50m / 164ft (Under perfect transmission conditions including straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets.)

VESA: 640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1200 DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p

Video: HDMI 1.4+HDCP (Sink device mirrors source), including 3D - frame packing/sequential (Blu-Ray) and Stereoscopic (Satellite/Cable broadcasts)

Supports DTS-HD, Dolby-HD, multichannel 7.1, 5.1, stereo (Sync mirrors source), PCM 2.0
12VDC - from mains
15 Watts (Transmitter) 5 Watts (Receiver) - power drawn from Transmitter or mains
51.02
N/A

Accessories

WyreStorm Express 1.0M HDMI Cable

WyreStorm Express HDMI cables are HDMI v1.4 certified and fully compatible with high-definition and 4K UltraHD video and audio signals without loss in quality or distortion.

Our HDMI cables are the ideal choice for the high-quality, reliable and affordable connection of 4K or HD devices over HDMI from 0.5m/1.6ft to 15m/49ft.

Features include:

Related products